Emission control technology selection tailored to your process.

Proper technology selection is fundamental to any successful emission reduction programme. Emission reduction is an environmental obligation and a legal requirement, but it should never compromise your production process. We match technology to your exhaust air, production cycles and energy system.

Home
Expertise

Technology Selection & Design

Technology-independent advice

Energy recovery & integration

Hands-on with every technology

Clear, independent advice on every route.

Based on hands-on experience with each technology, we advise on feasibility and the optimal emission control solution for your specific situation.

01
Thermal Oxidation

Regenerative, recuperative and catalytic oxidation, with heat recovery integrated into your energy system.

Learn more

02
Vapour Recovery

Pressure swing adsorption and membrane separation to recover hydrocarbons as product.

Learn more

03
Activated Carbon Adsorption

Adsorption for low concentrations and polishing, with realistic carbon consumption and change-out strategies.

Learn more

04
Wet Gas Scrubbers

Chemical and water scrubbing for soluble and reactive components such as ammonia, acids and amines.

Learn more

05
H2S Removal Systems

Biological, chemical and adsorptive routes for hydrogen sulphide and odour control.

Learn more

06
UV & Plasma Technologies

Non-thermal UV-C/ozone and plasma treatment for odour and VOCs at low energy demand.

Learn more

Have a stream that doesn’t fit a standard solution?

Complex production conditions demand specific concepts. Share your exhaust air data and we’ll assess which combination of technologies fits.

Selection is based on

Exhaust air quality

Production cycles

Energy system

Permit limits

02 / Holistic approach

Understanding the process before choosing the technology.

Effective technology selection is only possible with deep understanding of the originating process, whether coating, printing, surface treatment, chemical production or tank storage. Only then can the right technology be designed and specified.

Based on data and facts combined in a pre-engineering study, we develop sound advice on the most effective technology, with maximum cleaning performance and cost-saving energy recovery through systematic process integration.

We look further, aiming for minimal operating cost and a positive effect on your plant’s energy balance.

Data, comparison, design.

No single technology fits every process. We compare routes on your emission profile, independent of any supplier.


01

Data

Exhaust air characterised in relation to process conditions and operating modes.


02

Comparison

Technologies compared on performance, energy, operating cost, safety and ROI.


03

Design

The selected concept specified and designed for integration into your plant.

Ready to find the right technology for your exhaust stream?

04 / FAQ

Questions we often discuss with plant teams

The first technical conversation can usually identify the most important data gaps and feasible pathways.

Still have questions about your process?

Share the application and your main concern — we’ll map the most useful next step together.

Are you tied to a specific technology supplier?

No. Our assessment is technology-neutral. We work with proven partners only where their equipment genuinely fits your process.

What data do you need to start?

Flow rates, concentrations and composition of the exhaust air across operating modes, plus your permit limits and energy situation. Where data is missing, we can plan a measurement campaign.

Can heat from VOC treatment be reused?

Often, yes. Thermal oxidation can recover energy for heat, cooling or power, and we aim for a positive effect on your plant’s total energy balance.

Do you also design the selected system?

Yes. After selection we prepare the pre-engineering and basic engineering so the system can be tendered and built.

Contact

Start with your process

Not sure which VOC solution fits? Share the application and your main concern. We’ll use the first discussion to understand the process, available data and the most useful next step.

Broekstraat 6, 5292 ND Gemonde, NL

hello@bmprocess.nl

+31 6 42173663

Request a technical discussion

Response within one working day

Great! We’ve received your information.

Contact

Trusted by Industry Leaders

Not sure where to start? Talk to an engineer directly.