Clear, independent advice on every route.
Based on hands-on experience with each technology, we advise on feasibility and the optimal emission control solution for your specific situation.
Regenerative, recuperative and catalytic oxidation, with heat recovery integrated into your energy system.
Learn more
Pressure swing adsorption and membrane separation to recover hydrocarbons as product.
Learn more
Adsorption for low concentrations and polishing, with realistic carbon consumption and change-out strategies.
Learn more
Chemical and water scrubbing for soluble and reactive components such as ammonia, acids and amines.
Learn more
Biological, chemical and adsorptive routes for hydrogen sulphide and odour control.
Learn more
Non-thermal UV-C/ozone and plasma treatment for odour and VOCs at low energy demand.
Learn more
Have a stream that doesn’t fit a standard solution?
Complex production conditions demand specific concepts. Share your exhaust air data and we’ll assess which combination of technologies fits.
Selection is based on
Exhaust air quality
Production cycles
Energy system
Permit limits
02 / Holistic approach
Effective technology selection is only possible with deep understanding of the originating process, whether coating, printing, surface treatment, chemical production or tank storage. Only then can the right technology be designed and specified.
Based on data and facts combined in a pre-engineering study, we develop sound advice on the most effective technology, with maximum cleaning performance and cost-saving energy recovery through systematic process integration.
We look further, aiming for minimal operating cost and a positive effect on your plant’s energy balance.
No single technology fits every process. We compare routes on your emission profile, independent of any supplier.
01
DataExhaust air characterised in relation to process conditions and operating modes.
02
ComparisonTechnologies compared on performance, energy, operating cost, safety and ROI.
03
DesignThe selected concept specified and designed for integration into your plant.
Ready to find the right technology for your exhaust stream?
04 / FAQ
Questions we often discuss with plant teams
The first technical conversation can usually identify the most important data gaps and feasible pathways.
Share the application and your main concern — we’ll map the most useful next step together.
Are you tied to a specific technology supplier?
No. Our assessment is technology-neutral. We work with proven partners only where their equipment genuinely fits your process.
What data do you need to start?
Flow rates, concentrations and composition of the exhaust air across operating modes, plus your permit limits and energy situation. Where data is missing, we can plan a measurement campaign.
Can heat from VOC treatment be reused?
Often, yes. Thermal oxidation can recover energy for heat, cooling or power, and we aim for a positive effect on your plant’s total energy balance.
Do you also design the selected system?
Yes. After selection we prepare the pre-engineering and basic engineering so the system can be tendered and built.
Contact
Start with your process
Not sure which VOC solution fits? Share the application and your main concern. We’ll use the first discussion to understand the process, available data and the most useful next step.
Request a technical discussion
Response within one working day
Contact


