Clean-air engineering for food and beverage production.

Baking, frying, roasting, fermentation and drying release odours, VOCs and particulates that neighbours notice first. BM Process engineers odour abatement and energy-conscious integration that fits food-grade environments.

100+

Projects delivered


20+

Years senior experience


2

Strategic partners


1:1

Senior contact, no layers

Technology-independent assessment

ATEX-aware engineering

From concept to optimisation

Where do food plant
emissions arise?

01
Volatile Organic Compounds

Flavourings, oils, solvents and alcohols

Learn more

02
Odorous compounds

Fatty acids, sulphur compounds and amines

Learn more

03
Particulate matter

Frying, drying and milling processes

Learn more

04
Steam & condensate

Vapours with organic load from cooking lines

Learn more

05
Combustion gases

CO₂ and flue gas from ovens and boilers

Learn more

06
Roasting exhaust

Smoke, aerosols and odour from roasters

Learn more

01

Odour control & complaints

Recognisable food odours quickly lead to neighbourhood complaints


02

Regulatory compliance

Odour and VOC norms near urban and mixed-use zones


03

Health & hygiene

Airborne pollutants affect plant hygiene and cross-contamination


04

Sustainability goals

Lower energy use and emissions across the plant


05

Occupational safety

Some flavouring VOCs are hazardous at low concentrations

Why emissions must be managed

Odour is what your neighbours measure you by.

Food plant exhaust is often humid, greasy and variable. We design hygiene-friendly treatment that integrates with existing lines and recovers heat wherever the energy balance allows.

Technologies

Emission-control technologies we engineer and integrate.

Our strength lies in combining odour-abatement technology with hygiene-friendly, energy-conscious process integration.

Systems are designed for humid, greasy exhaust and food-grade hygiene requirements.

Smart integration

Cleaner air, lower energy bills. Always a holistic approach.

Grease & aerosols

Humidity

Hygienic design

Odour units

Heat recovery

Line integration

Engineering first, emissions controlled

We focus on odour abatement, hygiene-friendly design and energy-conscious integration for food and beverage manufacturers.


01

Odour assessment

Sources, odour units and dispersion around the site.


02

Pre-treatment

Grease separation, condensation and cooling.


03

Technology selection

Thermal, adsorption, biological and non-thermal routes compared.


04

Heat recovery

Integrating recovered energy into process air or water.


05

Commissioning

Odour measurements and performance optimisation.

Don’t see your process here?
Emission challenges rarely fit neat categories. Start from the problem — we’ll map the route.

Discuss your process

Industries we serve

One engineering partner across every emission-heavy sector — from coating lines and refineries to biogas plants, recycling halls and commercial kitchens.

Adhesives, Coating & Surface Treatment
VOC capture, solvent recovery and abatement for coating and laminating lines.

Explore sector

Petrochemical Industry
VRU, enclosed flares, RTO / CatOx and scrubbers for hydrocarbon streams.

Explore sector

Automotive
Paint booths, drying ovens, sealants and engine test cell exhaust.

Explore sector

Tank Storage
Vapour recovery, breathing losses and loading bay emissions.

Explore sector

Wastewater Treatment
Biofilters, scrubbers and carbon polishing for treatment plants.

Explore sector

Biogas & Renewable Energies
Gas upgrading, digester off-gas and CHP exhaust treatment.

Explore sector

Waste Treatment & Recycling
Sorting halls, MBT, composting and e-waste — odour, dust and VOC.

Explore sector

Food & Beverage
Odour, grease and VOC treatment with UV, plasma, RTO and scrubbers.

Explore sector

Project lifecycle

Independent engineering, practical delivery

One partner across the complete project lifecycle. BM Process connects process knowledge with proven emission-control technologies — helping you challenge assumptions, compare lifecycle costs and build a technically defensible investment case.

01
Assessment

Site review, data gap analysis and technology screening

02
Concept

Basis of design, CAPEX/OPEX comparison and roadmap

03
Execution

Vendor evaluation, interface coordination and support

04
Optimisation

Troubleshooting, energy review and system improvement

Engagements can start at any phase — not every assignment includes every stage.

Technology partner

Krantz Clean Air Solutions

BM Process supports Krantz thermal clean-air solutions in the Netherlands and Belgium, backed by extensive industrial engineering experience.

Engineering & local support by BM Process

Proven clean-air technology
Oxidation systems and heat integration for industrial exhaust air.
Regenerative – RTO

High thermal efficiency for continuous processes.

Recuperative

Direct heat exchange for compact installations.

Catalytic

Lower operating temperature, reduced fuel demand.

Heat recovery

Energy integration in the total plant heat balance.

Selection and sizing always follow your emission profile.
ATEX aware engineering, by design

ATEX & Safety

VOC control and explosion safety must be engineered together.

Safe operation requires control of VOC concentration together with suitable ventilation, ATEX zoning, ignition-source control, monitoring, interlocks and explosion-protection measures.

VOC concentration

Kept below safe limits

Ventilation

Dilution and capture

ATEX zoning

Classified areas

Ignition control

Equipment selection

Monitoring & interlocks

Detect and respond

Explosion protection

Mitigation measures

FAQ

Questions we often discuss with plant teams

The first technical conversation can usually identify the most important data gaps and feasible pathways.

Still have questions about your process?

Share the application and your main concern — we’ll map the most useful next step together.

Which emissions are typical in food production?

VOCs from flavourings, oils and alcohols, odorous fatty acids and sulphur compounds, particulates from frying and drying, steam with organic load, and combustion gases from ovens and boilers.

Which technology works best for roasting exhaust?

Roasters produce smoke, aerosols and strong odour at high temperature. Thermal or catalytic oxidation is usually the most reliable route, often combined with heat recovery.

How do you deal with grease in exhaust air?

Grease aerosols are removed upstream with separators, condensation or non-thermal treatment, so downstream equipment stays clean and efficient.

Can odour treatment reduce energy costs?

Yes. Heat recovered from oxidisers or oven exhaust can preheat process air or water, improving the overall plant energy balance.

Contact

Start with your process

Not sure which VOC solution fits? Share the application and your main concern. We’ll use the first discussion to understand the process, available data and the most useful next step.

Broekstraat 6, 5292 ND Gemonde, NL

hello@bmprocess.nl

+31 6 42173663

Request a technical discussion

Response within one working day

Great! We’ve received your information.

Contact

Trusted by Industry Leaders

Not sure where to start? Talk to an engineer directly.