Emission control for waste treatment and recycling plants.

Sorting, shredding, fermentation and thermal treatment release complex and highly variable air pollutants. BM Process engineers robust, field-proven treatment for municipal, industrial, chemical and e-waste recycling facilities.

100+

Projects delivered


20+

Years senior experience


2

Strategic partners


1:1

Senior contact, no layers

Technology-independent assessment

ATEX-aware engineering

From concept to optimisation

Where do waste plant
emissions arise?

01
Volatile Organic Compounds

Decomposing waste, solvents and process chemicals

Learn more

02
Odorous compounds

Ammonia, H₂S and mercaptans from organic waste

Learn more

03
Particulate matter

Crushing, shredding and handling of dry waste

Learn more

04
Combustion gases

CO, NOx and SO₂ from incineration or pyrolysis

Learn more

05
Acid gases & dioxins

Waste-to-energy processes and plastics treatment

Learn more

06
Battery & e-waste

Electrolyte vapours and dust from recycling lines

Learn more

01

Odour control & acceptance

Without abatement, waste sites face opposition and shutdown risk


02

Environmental & health protection

Dioxins, acid gases and particulates pose serious risks


03

Regulatory compliance (IED / BREF)

Strict limits under the Industrial Emissions Directive and BAT


04

Energy & resource recovery

Clean exhaust protects turbines and gas-cleaning units


05

Occupational health & ATEX

Mixed waste streams create explosive and harmful atmospheres

Why emissions must be managed

Variable waste needs robust treatment.

Waste and recycling exhaust changes with every delivery. We design treatment trains that cope with fluctuating loads and combine pragmatic engineering with smart emission-control solutions.

Technologies

Emission-control technologies we engineer and integrate.

Our strength lies in pragmatic engineering for variable waste streams — robust technologies, combined into treatment trains that meet IED and BREF requirements.

Treatment trains are sized for fluctuating waste composition and seasonal variation.

Smart integration

Robust treatment for variable waste. Always a holistic approach.

Hall extraction

Waste composition

IED / BREF

ATEX zoning

Dust & aerosols

Energy recovery

Engineering first, emissions controlled

We focus on pragmatic engineering services and smart emission-control solutions for waste treatment and recycling facilities.


01

Emission inventory

Mapping halls, shredders, composting and thermal units.


02

BAT gap analysis

Comparing current performance with IED and BREF limits.


03

Treatment train design

Combining dust removal, scrubbing, biofiltration and oxidation.


04

Safety & ATEX

Zoning and interlocks for explosive atmospheres.


05

Owner’s support

Vendor evaluation, commissioning and performance tests.

Don’t see your process here?
Emission challenges rarely fit neat categories. Start from the problem — we’ll map the route.

Discuss your process

Industries we serve

One engineering partner across every emission-heavy sector — from coating lines and refineries to biogas plants, recycling halls and commercial kitchens.

Adhesives, Coating & Surface Treatment
VOC capture, solvent recovery and abatement for coating and laminating lines.

Explore sector

Petrochemical Industry
VRU, enclosed flares, RTO / CatOx and scrubbers for hydrocarbon streams.

Explore sector

Automotive
Paint booths, drying ovens, sealants and engine test cell exhaust.

Explore sector

Tank Storage
Vapour recovery, breathing losses and loading bay emissions.

Explore sector

Wastewater Treatment
Biofilters, scrubbers and carbon polishing for treatment plants.

Explore sector

Biogas & Renewable Energies
Gas upgrading, digester off-gas and CHP exhaust treatment.

Explore sector

Waste Treatment & Recycling
Sorting halls, MBT, composting and e-waste — odour, dust and VOC.

Explore sector

Food & Beverage
Odour, grease and VOC treatment with UV, plasma, RTO and scrubbers.

Explore sector

Project lifecycle

Independent engineering, practical delivery

One partner across the complete project lifecycle. BM Process connects process knowledge with proven emission-control technologies — helping you challenge assumptions, compare lifecycle costs and build a technically defensible investment case.

01
Assessment

Site review, data gap analysis and technology screening

02
Concept

Basis of design, CAPEX/OPEX comparison and roadmap

03
Execution

Vendor evaluation, interface coordination and support

04
Optimisation

Troubleshooting, energy review and system improvement

Engagements can start at any phase — not every assignment includes every stage.

Technology partner

Krantz Clean Air Solutions

BM Process supports Krantz thermal clean-air solutions in the Netherlands and Belgium, backed by extensive industrial engineering experience.

Engineering & local support by BM Process

Proven clean-air technology
Oxidation systems and heat integration for industrial exhaust air.
Regenerative – RTO

High thermal efficiency for continuous processes.

Recuperative

Direct heat exchange for compact installations.

Catalytic

Lower operating temperature, reduced fuel demand.

Heat recovery

Energy integration in the total plant heat balance.

Selection and sizing always follow your emission profile.
ATEX aware engineering, by design

ATEX & Safety

VOC control and explosion safety must be engineered together.

Safe operation requires control of VOC concentration together with suitable ventilation, ATEX zoning, ignition-source control, monitoring, interlocks and explosion-protection measures.

VOC concentration

Kept below safe limits

Ventilation

Dilution and capture

ATEX zoning

Classified areas

Ignition control

Equipment selection

Monitoring & interlocks

Detect and respond

Explosion protection

Mitigation measures

FAQ

Questions we often discuss with plant teams

The first technical conversation can usually identify the most important data gaps and feasible pathways.

Still have questions about your process?

Share the application and your main concern — we’ll map the most useful next step together.

Which emissions occur at waste and recycling facilities?

VOCs from decomposing waste and solvents, odorous ammonia, H2S and mercaptans, particulates from shredding and handling, combustion gases from thermal treatment, and acid gases or dioxins from waste-to-energy processes.

Which BREF applies to my facility?

Most facilities fall under the Waste Treatment BREF; incineration plants under the Waste Incineration BREF. We assess which BAT conclusions apply and where the gaps are.

Can one technology handle all pollutants?

Rarely. Waste exhaust usually needs a treatment train, for example dust removal, scrubbing for ammonia and H2S, then biofiltration or oxidation for odour and VOCs.

Do you work on battery and chemical recycling?

Yes. These processes release electrolyte vapours, solvents and fine dust, and often involve ATEX zones. We engineer capture and treatment systems suited to these hazards.

Contact

Start with your process

Not sure which VOC solution fits? Share the application and your main concern. We’ll use the first discussion to understand the process, available data and the most useful next step.

Broekstraat 6, 5292 ND Gemonde, NL

hello@bmprocess.nl

+31 6 42173663

Request a technical discussion

Response within one working day

Great! We’ve received your information.

Contact

Trusted by Industry Leaders

Not sure where to start? Talk to an engineer directly.