Clean biogas, clean exhaust, reliable energy.

Digesters, upgrading units and CHP engines all produce off-gas that needs treatment. BM Process engineers H₂S, siloxane, odour and methane-slip control so your renewable energy plant runs cleanly and stays compliant.

100+

Projects delivered


20+

Years senior experience


2

Strategic partners


1:1

Senior contact, no layers

Technology-independent assessment

ATEX-aware engineering

From concept to optimisation

Where do biogas
emissions arise?

01
Hydrogen sulfide (H₂S)

From digestion of protein-rich feedstock and manure

Learn more

02
Siloxanes

From sewage sludge and waste, damaging CHP engines

Learn more

03
Methane slip

From upgrading off-gas, CHP exhaust and leaks

Learn more

04
Ammonia (NH₃)

From digestate handling and nitrogen-rich substrates

Learn more

05
Odorous compounds

Feedstock reception, storage and digestate drying

Learn more

06
Combustion exhaust

CO, NOx and formaldehyde from gas engines

Learn more

01

Engine & asset protection

H₂S and siloxanes cause corrosion and deposits in CHP and upgrading units


02

Greenhouse-gas impact

Methane slip undoes much of the climate benefit of biogas


03

Permit compliance

Medium Combustion Plant limits for formaldehyde, NOx and CO


04

Odour & acceptance

Feedstock and digestate odours affect local support for the plant


05

Gas quality

Grid injection and bio-LNG demand strict gas specifications

Why emissions must be managed

Gas cleaning protects both the climate and the plant.

A biogas plant is only as green as its emissions profile. We assess raw-gas cleaning, upgrading off-gas and engine exhaust together, so that every stage of the energy chain performs as intended.

Technologies

Emission-control technologies we engineer and integrate.

Our strength lies in combining gas-treatment know-how with process engineering — from desulphurisation of raw biogas to methane-slip oxidation.

Gas-treatment capacity is matched to feedstock mix, gas yield and seasonal variation.

Smart integration

Clean gas in, clean exhaust out. Always a holistic approach.

Digester gas

Upgrading off-gas

CHP exhaust

ATEX zoning

Digestate handling

Gas specifications

Engineering first, emissions controlled

We engineer and integrate gas-treatment and emission-control systems for new and existing biogas and renewable energy plants.


01

Gas characterisation

Measuring H₂S, siloxanes, ammonia and methane across operating modes.


02

Raw-gas cleaning

Desulphurisation and polishing to protect engines and upgraders.


03

Off-gas treatment

Methane-slip oxidation for upgrading units.


04

Exhaust compliance

Catalysts and SCR for CHP engines.


05

Safety & integration

ATEX zoning, flares and interlocks across the gas train.

Don’t see your process here?
Emission challenges rarely fit neat categories. Start from the problem — we’ll map the route.

Discuss your process

Industries we serve

One engineering partner across every emission-heavy sector — from coating lines and refineries to biogas plants, recycling halls and commercial kitchens.

Adhesives, Coating & Surface Treatment
VOC capture, solvent recovery and abatement for coating and laminating lines.

Explore sector

Petrochemical Industry
VRU, enclosed flares, RTO / CatOx and scrubbers for hydrocarbon streams.

Explore sector

Automotive
Paint booths, drying ovens, sealants and engine test cell exhaust.

Explore sector

Tank Storage
Vapour recovery, breathing losses and loading bay emissions.

Explore sector

Wastewater Treatment
Biofilters, scrubbers and carbon polishing for treatment plants.

Explore sector

Biogas & Renewable Energies
Gas upgrading, digester off-gas and CHP exhaust treatment.

Explore sector

Waste Treatment & Recycling
Sorting halls, MBT, composting and e-waste — odour, dust and VOC.

Explore sector

Food & Beverage
Odour, grease and VOC treatment with UV, plasma, RTO and scrubbers.

Explore sector

Project lifecycle

Independent engineering, practical delivery

One partner across the complete project lifecycle. BM Process connects process knowledge with proven emission-control technologies — helping you challenge assumptions, compare lifecycle costs and build a technically defensible investment case.

01
Assessment

Site review, data gap analysis and technology screening

02
Concept

Basis of design, CAPEX/OPEX comparison and roadmap

03
Execution

Vendor evaluation, interface coordination and support

04
Optimisation

Troubleshooting, energy review and system improvement

Engagements can start at any phase — not every assignment includes every stage.

Technology partner

Krantz Clean Air Solutions

BM Process supports Krantz thermal clean-air solutions in the Netherlands and Belgium, backed by extensive industrial engineering experience.

Engineering & local support by BM Process

Proven clean-air technology
Oxidation systems and heat integration for industrial exhaust air.
Regenerative – RTO

High thermal efficiency for continuous processes.

Recuperative

Direct heat exchange for compact installations.

Catalytic

Lower operating temperature, reduced fuel demand.

Heat recovery

Energy integration in the total plant heat balance.

Selection and sizing always follow your emission profile.
ATEX aware engineering, by design

ATEX & Safety

VOC control and explosion safety must be engineered together.

Safe operation requires control of VOC concentration together with suitable ventilation, ATEX zoning, ignition-source control, monitoring, interlocks and explosion-protection measures.

VOC concentration

Kept below safe limits

Ventilation

Dilution and capture

ATEX zoning

Classified areas

Ignition control

Equipment selection

Monitoring & interlocks

Detect and respond

Explosion protection

Mitigation measures

FAQ

Questions we often discuss with plant teams

The first technical conversation can usually identify the most important data gaps and feasible pathways.

Still have questions about your process?

Share the application and your main concern — we’ll map the most useful next step together.

What is methane slip and why does it matter?

Methane slip is unburned or unrecovered methane released from upgrading units, engines or leaks. Methane is a strong greenhouse gas, so even small slip rates can offset much of the climate benefit of biogas.

How do you remove H2S from biogas?

Depending on load and variability, we combine in-digester dosing, biological desulphurisation and chemical or activated-carbon polishing to reach the gas specification required by engines or upgraders.

Why are siloxanes a problem?

Siloxanes from sludge and waste form silica deposits in engines and catalysts, increasing maintenance and downtime. Activated carbon or dedicated siloxane filters remove them before the gas is used.

Can you treat lean upgrading off-gas?

Yes. Off-gas from membrane, PSA or amine upgrading often has a low methane content. Regenerative thermal oxidation can treat it efficiently with minimal support fuel.

Contact

Start with your process

Not sure which VOC solution fits? Share the application and your main concern. We’ll use the first discussion to understand the process, available data and the most useful next step.

Broekstraat 6, 5292 ND Gemonde, NL

hello@bmprocess.nl

+31 6 42173663

Request a technical discussion

Response within one working day

Great! We’ve received your information.

Contact

Trusted by Industry Leaders

Not sure where to start? Talk to an engineer directly.